Configuring Radar targets
You specify the distance for when a Radar target should be defined as dangerous from the
Radar Configuration dialog. From this dialog you also define time limits for when a target
should be considered lost, and when it should be removed from the chart panel.
You can use this dialog to enable AIS/Radar targets associations if your radar supports
associations. To show associated targets as AIS, refer to "Display settings for AIS targets" on page 39.
Viewing target information
You can view a list of all tracked targets and basic information for each targets from the
Targets menu option. This list shows all tracked targets, independent on AIS or Radar target
display settings.
The following example shows a list of AIS targets.
Other vessels on the chart panel | E50xx ECDIS Operator Manual
43
To Next Page
Loading...
Need help?
General
