Observation Potential causes Possible solutions
No audible alarms
Audio off or E0102 Alarm
panel not functioning
• Ensure Audio is switched
on in settings (refer
operational manual)
• Ensure E0102 Alarm panel
installed as per installation
manual
Trackball not working
Trackball not switched on or
battery depleted
• Ensure receiver plugged
into USB port on E5000
processor
• Ensure trackball unit is
switched on
• Ensure that the battery in
the trackball is not
depleted
PLECDIS not synchronizing
Ethernet cable not plugged
in or configuration
• Ensure Ethernet cable is
plugged in properly
• Refer to installation manual
and operational manual for
PLECDIS configuration
Smoke coming out of E5000
processor unit
Unit no longer serviceable
• Unplug all cables from unit
• Simrad technician required
72
Fault finding| E50xx ECDIS Operator Manual
To Next Page
Loading...
