Remote control of the MFD
Remote control options
The following options are available for remotely controlling your MFD:
• a smartphone or a tablet, connected to the same WiFi hotspot as the MFD(s)
• a compatible remote control unit connected to the same NMEA network as the MFD. The
documentation included with the remote control unit provides connection and usage
information.
• a smartphone or a tablet, connected to an MFD acting as a WiFi access point
Ú
Note: For safety reasons, some functions cannot be controlled from a remote unit.
Smartphones and tablets
The Link app
The Link app must be used to connect a phone or tablet to the MFD.
When connected, the Link app on the phone or tablet can be used to:
• Remotely view and control the system
• Back-up and restore settings
• Back-up and restore waypoints, routes and tracks
The Link app can be downloaded from the relevant phone/tablet application store.
Connecting via a hotspot
If you connect a phone/tablet and the MFD(s) to the same hotspot, you can use your phone/
tablet to control all MFDs on the same network.
Connecting to an MFD acting as an access point
If you do not have access to a WiFi network, you can connect your phone/tablet directly to
the MFD.
The MFD network name (SSID) will be displayed as an available network in the phone/tablet.
24
Remote control of the MFD| NSS evo3S Operator Manual
133
To Next Page
Loading...
Need help?
General
