SOG as boat speed and COG as heading
Use SOG as boat speed
If boat speed is not available from a paddle wheel sensor, it is possible to use speed over
ground from a GPS. SOG will be displayed as boat speed and used in the true wind
calculations and the speed log.
Use COG as heading
If heading data is not available from a compass sensor, it is possible to use COG from a GPS.
COG will be used in the true wind calculations.
Ú
Note: The autopilot cannot be operated using COG as the heading source. COG cannot
be calculated when stationary.
Activating/deactivating features and applications
Use the system settings features option to activate/deactivate features and applications.
Manage features and applications
You can manage and install/uninstall the features and apps. When a feature/app is
uninstalled, the icon is removed from the home page. The feature/application can be
installed again.
Feature unlock
Some additional features can be sold separately. These features can be unlocked by entering
an unlock code.
Select the feature you want to unlock. Follow the instructions to purchase and enter the
feature unlock code.
After a feature unlock code is entered in the unit, the feature is available for use.
Ú
Note: The feature unlock option is only available if your unit supports a locked feature.
Alarms
Settings
List of all available alarm options in the system, with current settings.
From this list you can activate, deactivate and change alarm limits.
System setup | NSS evo3S Installation Manual
27
To Next Page
Loading...
Need help?
General
