Bridge Control
About Bridge Control
The Bridge Control feature allows you to control which pages are shown on several displays
at the same time. The feature is used on vessels with multiple displays mounted in the same
place to quickly configure what information is displayed.
There can be a maximum of four different bridges on your system, and you can have up to
four displays grouped into one bridge. Each display can be configured to only one bridge.
When the displays are included in a bridge, you can configure twelve page configurations
(presets) for each bridge.
Adding displays to a Bridge
Ú
Note: All displays must be turned on to be available for bridge configuration.
1. Open the Bridge Configuration dialog
2. Select to configure a new bridge or to edit an existing
-
The Bridge Configuration for the selected bridge will be shown, and all displays that are
not already assigned to a bridge will be listed
3. Select the display you want to add to the bridge
-
Arrange the displays from left to right in the same physical layout as the displays on
your current bridge/dashboard/helm
4. Rename the bridge if required
5. Save the configuration
The Bridge Control button will be displayed on the home page of all displays that are
configured for a bridge.
Configuring the preset pages for displays in a bridge
1. Activate the Bridge Control panel by swiping down on the home page.
2. To add a new bridge page, select the add icon. To edit an existing page, select the edit
icon.
3. Select the display for which you want to define the preset page.
-
The page layout option for the selected display will be read from the network, showing
main features and configured favorite pages.
4. Select the preferred page.
-
Select the blank page if you do not want that display to be included in the selected
bridge preset.
5. Repeat step 3 and 4 until a page is configured for all displays in all bridge presets.
6. Select the edit icon to leave the add or edit mode and to save your configuration.
24
Customizing your system | NSS evo3S Operator Manual
To Next Page
Loading...
Need help?
General
