Menu button
Displays the menu of the active panel. Use menu options to customize the image. The panel
menu options are further explained later in this manual in each application chapter.
Instrument bar
The instrument bar displays information from sensors connected to the system.
By default, the instrument bar is shown on the panel. You can turn the instrument bar off.
You can select the predefined bar to be shown and you can change the information
displayed in the predefined bar. Refer to "Customizing the instrument bar" on page 21.
Control bar
The control bar contains buttons for launching controllers or features enabled in your
system. The different controllers are described in applicable chapters later in the manual.
Introduction | NSS evo3S Operator Manual
17
To Next Page
Loading...
