MAINTENANCE PROCEDURES
TB24 Plus&26J Plus Maintenance Manual 5-5 © Jun 2022
REPAIR & INSPECTION REPORT
C-2 Inspect Boom Extend/
Retract Cables and Pulleys
C-3 Replace Engine Oil
C-4 Replace Engine Oil Filter
C-5 Replace Hydraulic Tank
Air Filter
C-6 Inspect Weighing System
Checklist D Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
D-1 Replace Drive Reducer
Gear Oil
D-2 Replace Slewing
Reducer Gear Oil
D-3 Replace Hydraulic Oil
D-4 Replace Hydraulic Tank
Suction Filter
D-5 Replace Coolant and
Coolant Hoses (water-cooled
engine)
D-6 Replace Fuel Hoses
D-7 Inspect Boom Wear Pads
User
Inspector Signature
Inspection Date
Inspector Title
Inspector Company
CHECKLIST A
PROCEDURES
A-1 Inspect All Manuals
Keeping the Operation Manual and Maintenance
Manual in appropriate place is vital to safe machine
operation. The manuals should be kept at all times in
the manual storage container on the platform. If the
manual is missing or illegible, it will fail to provide the
information necessary for safe machine operation.
• Verify the manual storage container is properly
installed on the platform.
• Verify the Operation Manual and Maintenance
Manual are in good condition and placed inside the
storage container.
• Verify each page of the manuals is legible and
intact.
To Next Page
Loading...
