• Select the bitmap image and enter the dimensions to match those in Inkscape (if that is a requirement).
Drag the project, as needed, to re-center in the Sign Area:
• Before adding the contour lines, click on the Select/deselect all layers icon at the bottom of the Filter
Colors and Objects Panel until the registration marks are no longer visible (or appear as dashed lines).
Alternatively, hold the Shift key and left click on the black square. By deactivating the color black, contour
lines won’t be placed around the registration marks:
• With the reg marks inactive, use the Create outline on bitmap icon to add contour cut lines around
the images. This is covered in Section 5.01.2:
To Next Page
Loading...
