119
Mast Chain Visual Inspection Section 5 – Procedures
4. Pull the chains attached to mast section 1 up
and over the double rollers so they drop into the
mast column. Make sure they do not tangle.
Section 2
Figure 35 Section 1 to Section 3 Chains
NOTE
It is recommended that 2 lifting straps (or similar)
be attached evenly to mast section 2 for a
straight, even lift.
5. Lift the mast section up to a comfortable working
height and remove the lower wear pads. Mark
the location of each wear pad.
Section 1
Figure 36 Wear Pads Removal (Section 2)
To Next Page
Loading...
