SMA HM-20 User Manual

11 Device Administration
SMA Solar Technology AG
Operating manualHM-20-BE-en-1968
When you log in the portal after resetting the SunnyHomeManager, a notice is shown automatically stating that the
SunnyHomeManager has been reset. You will be asked whether you want to reassign the SunnyHomeManager to
the system.
Requirement:
☐ You must have the user role Installer or PV System Administrator (see Section16.1, page114).
Procedure:
1. Open www.sunnyportal.com and select System setup assistant.
or
Go to www.sunnyportal.com/register.
☑ The system setup assistant opens.
2. Select [Next].
☑ The page User registration opens.
3. Activate the checkbox I am already registered in SunnyPortal.
4. Enter the e-mail address and the SunnyPortal password in the fields E-mail address and Password.
5. Select [Next].
☑ The page Select PV system opens.
6. Activate the field Add or replace devices.
7. In the line of the SunnyHomeManager system to which you would like to reassign the SunnyHomeManager,
select .
8. Select [Next].
☑ The page Select devices opens.
9. Enter the identification key of the SunnyHomeManager in the field PIC. Enter the registration ID of the
SunnyHomeManager in the field RID. Tip: You can read off the identification key and the registration ID from the
type label on the side of the SunnyHomeManager or from the supplied label.
10. Select [Identify].
11. Select [Next].
12. Select [Finish].
11.8 Restarting the SunnyHomeManager
A restart of the SunnyHomeManager is only necessary as a result of a corresponding error message (see Section18,
page120).
Procedure:
1. Call up the Properties of the HomeManager under Configuration > Device overview in SunnyPortal.
2. Select [Edit] on the device tab.
3. Activate the option Complex configuration.
4. In the upper text block in the line Product group: click the field --> Restart and in the pop-up window that opens
activate the execution via the button [Restart].
☑ The system reports the successful initiation of the restart. The restart is carried out automatically.
Alternatively, you can also perform a restart directly on the device:

SMA HM-20 Specifications

General

Brand	SMA
Model	HM-20
Category	Measuring Instruments
Language	English