TABLE OF CONTENTS
1. INTRODUCTION 7
1.1 Welcome 7
1.2 Overview 8
1.2.1 Hardware 8
1.2.2 Touch Screen 8
1.2.3 DVI Input 8
1.2.4 Keyboard Tray 9
2. WORK CHANNELS AND ACTIVE CHANNEL 10
2.1 Work Channels 10
2.1.1 Overview 10
2.1.2 Faders 10
2.1.3 Solo Touch Points 11
2.1.4 Mute Buttons 11
2.1.5 Inject Touch Points 11
2.1.6 Latched Inject 11
2.1.7 Hold Buttons 11
2.1.8 Channel Information Display 12
2.1.9 Channel Encoder Display 12
2.2 Active Channel 13
2.2.1 Overview 13
2.2.2 Active Blocks 13
2.2.3 Active Encoders 13
2.2.4 Active Controls 13
2.2.5 Channel Lock 14
2.2.6 Resync Tracks 14
3. INSERTS, EQ AND DYNAMICS 15
3.1 Graying & Selected Insert 15
3.2 Inserts 15
3.2.1 Inserts Block 15
3.2.2 Inserts Active Block 15
3.2.3 Inserts Active Encoders 15
3.2.4 Inserts Active Controls 16
3.3 EQ 16
3.3.1 EQ Blocks 16
3.3.2 EQ Active Block 16
3.3.3 EQ Encoders 17
3.3.4 Active Controls 17
3.3.5 Channel Encoder 17
3.4 Dynamics 18
3.4.1 Dynamics Block 18
3.4.2 Dynamics Active Block 18
3.4.3 Dynamics Encoders 18
3.4.4 Active Controls 19
3.4.5 Channel Encoder 19
Operation Manual – Tango Smart Console 2
To Next Page
Loading...