HRX-MM-N007
Chapter 4 Service Procedure
HRS Series 4.5 Replacement Procedure
Be sure to shut off the breaker of the facility power supply (the user’s
machine power supply) before replacement work.
4.5.9 Replacement of dustproof filter
＜HRS-A--＞
Table 4-16 Part number of service parts (Dustproof filter)
Removal
1. Pull out the lower part of the side surface of the dustproof filter.
2. When the magnet comes off, pull the dustproof filter downwards to remove.
Care should be taken not to deform or scratch the air-cooled condenser.
Fig. 4.5-17 Removal of dustproof filter
Mounting
1. Mount the dustproof filter in reversed order of removal.
To Next Page
Loading...
Need help?
General
