HRX-MM-N007
Chapter 4 Service Procedure
HRS Series 4.5 Replacement Procedure
4.5.5 Replacement of mechanical seal set
＜HRS-A/W-10-(M)T＞ (For high pressure pump 100V type)
Table 4-10 Part number of service parts (Mechanical seal set)
Mechanical seal set [ For 100V type option T ]
Mechanical seal set [ For 100V type option MT ]
＜HRS-A/W-20-(M)T＞ (For high pressure pump 200V type)
Table 4-11 Part number of service parts (Mechanical seal set)
Mechanical seal set [ For 200V type option T, MT ]
O-ring size
These service parts include three of O-rengs.
Please use A for HRS012/018/024/030 series (Only the high pressure pump).
Table 4-12 O-ring size
Only the high pressure pump (Option:T)
Only the high pressure pump (Option:T)
Be sure to shut off the breaker of the facility power supply (the user’s
machine power supply) before replacement work.
To Next Page
Loading...
