SMC Networks HRS012-A-10 Series - Page 173

HRX-MM-N007
Chapter 4 Service Procedure
HRS Series 4.5 Replacement Procedure
4-37
Replacement of front panel B
 Removal
1. Remove the upper panel, the panels on both sides and the front panel referring the 4.2.1
Removal and the mounting of the panel.
2. Remove the front panel B. (Screw ×4)
Fig. 4.5-21 Removal of front panel B
 Mounting
1. Mount the front panel B. (Screw ×4)
[Tips]
Mount front panel A aligning with holes at the center.
2. Mount the upper panel, the panels on both sides and the front panel in reversed order of
removal.
2. Front panel B
2. Screw
Holes
2. Screw
Until production in February 2015 (Serial No. TP*** or earlier)