Snapmaker A150 - Maintenance; Troubleshooting; Waste Disposal

05 Waste Disposal 163
5.1 Packaging 163
5.2 CNC Bits 163
5.3 Wasted Material 163
5.4 Electronics 163
06 Maintenance 164
6.1 Maintenance Schedule 164
6.2 Before You Carve 165
6.3 Every Month 169
6.4 Every Three Months 172
07 Troubleshooting 173
7.1 The CNC Bit Bumps into Clamp Sets 173
7.2 The CNC Bit Breaks During Carving 173