Snapmaker A150 - Basswood (1.5 MM); Wood

User Manual |
71
Laser Engraving and Cutting - 02 Material Library
2.2 Wood
Work Parameters
Engraving in Line Mode
Density 5 dot/mm
Work Speed 500 mm/min
Power 100%
Engraving in Dot Mode
Density 5 dot/mm
Work Speed 2500 mm/min
Dwell Time 5 ms/dot
Power 60%
2.3 Basswood (1.5 mm)
Work Parameters
Engraving in Line Mode
Density 5 dot/mm
Work Speed 500 mm/min
Power 80%
Engraving in Dot Mode
Density 5 dot/mm
Work Speed 2500 mm/min
Dwell Time 5 ms/dot