Snapmaker A150 - Vegetable-Tanned Leather (1.5 MM)

User Manual |
73
Laser Engraving and Cutting - 02 Material Library
2.5 Vegetable-tanned Leather (1.5 mm)
Work Parameters
Engraving in Line Mode
Density 5 dot/mm
Work Speed 800 mm/min
Power 80%
Engraving in Dot Mode
Density 5 dot/mm
Work Speed 2500 mm/min
Dwell Time 5 ms/dot
Power 30%
Cutting
Work Speed 50 mm/min
Passes 3
Pass Depth 0.6 mm
Power 100%