Snapmaker A150 - Mdf

User Manual |
72
Laser Engraving and Cutting - 02 Material Library
Power 30%
Cutting
Work Speed 180 mm/min
Passes 2
Pass Depth 0.6 mm
Power 100%
2.4 MDF
Work Parameters
Engraving in Line Mode
Density 5 dot/mm
Work Speed 800 mm/min
Power 70%
Engraving in Dot Mode
Density 5 dot/mm
Work Speed 2500 mm/min
Dwell Time 5 ms/dot
Power 20%