Snapmaker A150 - Abs

User Manual |
24
3D Printing - 02 Filament Library
2.3 ABS
Filament Properties
Physical Properties
Diameter 1.75 mm
Density 1.06 g/cm
3
Thermal Properties
Heat Deflection Temperature 73°C (163.4°F)
Mechanical Properties
Flexural Strength 68 Mpa (9.9 ksi)
Flexural Modulus 1,203 Mpa (174.5 ksi)
Tensile Strength 40 MPa (5.8 ksi)
Impact Strength 42 KJ/m
2
Elongation at Break 30%
Printing Parameters
Printing Temperature 230°C–240°C (446°F–464°F)
Heated Bed Temperature 95°C–110°C (203°F–230°F)
Printing Speed 40 mm/s–100 mm/s
ABS emits pungent odors and toxic particles when printed. Use this type of filaments in a
well-ventilated place and wear protective masks.