Snapmaker A150 - Petg; Tpu

User Manual |
25
3D Printing - 02 Filament Library
2.4 TPU
Filament Properties
Physical Properties
Diameter 1.75 mm
Density 1.21 g/cm
3
Thermal Properties
Melt Flow Index 1.2 g/10 min
Mechanical Properties
Tensile Strength 35 MPa (5.1 ksi)
Elongation at Break 800%
Printing Parameters
Printing Temperature 230°C–250°C (446°F–482°F)
Heated Bed Temperature 45°C–60°C (113°F–140°F)
Printing Speed 10 mm/s–50 mm/s
2.5 PETG
Filament Properties
Physical Properties
Diameter 1.75 mm