SNR S2940-8G-v2 User Manual

SNR S2940-8G-v2 Switch Configuration Guide
MAC Table Configuration
MAC Address Binding Configuration Task List
1. Enable MAC address binding function for the ports
2. Lock the MAC addresses for a port
3. MAC address binding property configuration
4. mac-notification trap configuration
1. Enable MAC address binding function for the ports
Command Explanation
Port Mode
switchport port-security
no switchport port-security
Enable MAC address binding function for the port and lock
the port. When a port is locked, the MAC address learn-
ing function for the port will be disabled: the 'no switchport
port-security' command disables the MAC address binding
function for the port, and restores the MAC address learning
function for the port.
2. Lock the MAC addresses for a port
Command Explanation
Port Mode
switchport port-security lock
no switchport port-security lock
Lock the port, then MAC addresses learned will be disabled.
The 'no switchport port-security lock' command restores the
function.
switchport port-security convert Convert dynamic secure MAC addresses learned by the port
to static secure MAC addresses.
switchport port-security timeout
<value>
Enable port locking timer function; the 'no switchport port-
security timeout' restores the default setting.
no switchport port-security time-
out
switchport port-security mac-
address <mac-address>
no switchport port-security mac-
address <mac-address>
Add static secure MAC address; the 'no switchport port-
security mac-address' command deletes static secure MAC
address.
Admin Mode
clear port-security dynamic [ad-
dress <mac-addr> | interface
<interface-id>]
Clear dynamic MAC addresses learned by the specified
port.
159

SNR S2940-8G-v2 Specifications

General

Brand	SNR
Model	S2940-8G-v2
Category	Switch
Language	English