SOLO Communication Manual - UART and USB
www.solomotorcontrollers.com
September 2021 - Revision V_1.0.1 Copyright © 2021, All right Reversed. SOLO motor controllers.
7
Introduction
Purpose of this user manual
This manual intends to discuss the data communication methods of UART and USB with SOLO
UNO, SOLO MINI and SOLO BETA comprehensively.
We will initially start by introduction of major data types which are used for the communications
and then explicitly discuss each of the mentioned protocols, eventually the goal of this Manual is
to give a clear idea about how to setup and utilize SOLO communication networks powered by
UART or USB and what is the purpose of each command existing in our command lists.
If after reading this manual or during your experimentations with our product you had any
questions, you can use SOLO Motor Controllers Forum to share with us the questions and get
back your answers promptly.
To Next Page
Loading...