Version 5.2 Sourcefire 3D System Installation Guide 148
Hardware Specifications
Sourcefire 7000 Series Devices
Chapter 6
The front panel of the chassis houses LEDs, which display the system’s operating
state. The
70xx Family Front Panel LEDs table describes the LEDs on the front
panel.
70xx Family Front Panel LEDs
LED DESCRIPTION
Reset button Allows you to reboot the appliance without disconnecting it from the power
supply.
System status Indicates the system status:
• A green light indicates the system is powered up and operating normally, or
powered down and attached to AC power.
• An amber light indicates a system fault.
See the 70xx Family System Status table on page 149 for more information.
Hard drive activity Indicates the hard drive status:
• A blinking green light indicates the fixed disk drive is active.
• If the light is off, there is no drive activity or the system is powered off.
System ID When pressed, the ID button displays a blue light, and a blue light is visible at
the rear of the chassis.
Power button and
LED
Indicates whether the appliance has power:
• A green light indicates that the appliance has power and the system is on.
• No light indicates the system is shut down or does not have power.
To Next Page
Loading...