General Operation Installation & Configuration Guide for MAXPage
Adding a Reminder
1. At the User Mode menu screen, press to select Reminders.
2. Then press to select Add Reminder. Once you are in the Reminders Menu, you see the following
screen:
Reminder[ ]
Msg[ ]
3. To exit this menu without saving changes, press the key.
4. If you wish to enter a reminder, type a number in the reminder field between 1 and 10. This is the
Reminder ID.
5. Press the key to move along to the next field.
6. The next field is the Msg field. Type the message you want the recipient to receive.
7. Press the key to move along to the next screen.
8. The first field on the next screen is Recipient. Type the ID of the pager or group you wish to receive the
reminder here. If the pager does not exist, an error message is shown displaying <ID Not Found>.
Recipient [ ] Set
Time [ : ]
9. Press the key to move along to the Set Time field.
10. Using the keypad, type the time you wish the reminder to occur at, in 24-hour format.
11. Use the key to jump from the Hours field to the Minutes field.
12. Press the key to save changes and return to the Reminders Menu screen.
13. To return to Normal Mode, press the key twice to exit out of all menus. MAXPage then restarts and is
ready for use.
Deleting a Reminder
1. At the User Mode menu screen, press to select Reminders.
2. Press to select Del Reminder. Once you are in the Reminders Menu, you see the following screen:
Reminder[ ]
Msg[ ]
3. To exit this menu without saving changes, press the key.
4. Type in the number in the reminder field between 1 and 10 of the Reminder ID you wish to delete. The
details for that particular reminder are displayed, if a valid entry exists.
5. If you wish to delete this Reminder ID, press the key. A new screen is shown prompting to confirm
deletion of this ID as shown below.
To Next Page
Loading...