57
Click File|Save to save the database to the currently open database filename. You are not prompted for a
filename to save to, if a database file is already open.
or
Click File|Save As to save the database as a new file. You are prompted for a filename to save the file to.
Updating Telephone (PBX) Voice Prompts on MAXPage Unit
These voice prompt files are played when a user connects to MAXPage via the Telephone (PBX) port such as “Enter
pager number.” To send new .wav sound files to the unit, follow the directions below. This is useful for uploading
sound files in a different language. These files are normally supplied by your place of purchase.
1. Click File|Update Voice Prompts.
2. You are prompted to choose a language. The sound files should be in the same directory as the
maxpage.exe file (default c:\program files\commtech wireless\maxpage3).
3. Choose OK. The files begin transferring.
Logging Out of Software
To log out of the software simply choose File|Logout. Most of the software functions then become disabled until a
user logs in again.
Disconnecting the MAXPage Connection
To close the serial connection between the PC and the MAXPage unit, choose File|Disconnect from MAXPage.
A connection is not required between the PC and MAXPage unit if you are editing and saving changes to a local
database file on the PC.
Configuration of Database
Configuring Pagers
The Pagers button is used to add, edit, and delete pagers within a database.
The Pagers screen displays.
To Next Page
Loading...