27
ID[ 1] DELETE
(Send confirms)
6. Press the key. The screen displays Reminder Deleted.
7. If you do not wish to delete that reminder from the database, press a numeric key on the keypad, and you
are returned to the previous menu without deleting it.
8. To return to Normal Mode, press the key twice to exit out of all menus. MAXPage then restarts and is
ready for use.
Configuration Mode
Entering Config Mode
To enter Config Mode whilst at the Main Screen, press the , , and keys simultaneously or by pressing F9
on the PS2 keyboard if installed.
NOTE: If the password feature has been enabled, you have to enter this in before proceeding.
NOTE: This is the “Maint” password (set to 123456 by default)
Once you are in Config Mode, there are four menu options:
1.Pagers 2.Ports
3.Alarm 4.System
NOTE: The Alarm menu item may not be available on all units as it is a licensed option. Contact your place of
purchase to enable the alarm inputs if needed.
Pagers
This section contains options to add, edit, or delete pagers and groups from the database.
Pagers
You need to register a pager in the database before you can send any messages.
1. At the Config Mode menu screen, press to select Pagers. You then see the screen below.
1.Pagers
2.Groups
2. Then press to select Pagers. You then see the screen below. This is referred to as the Pagers Menu.
1.Add/Edit Pager
2.Delete Pager
Adding or Editing a Pager
To Next Page
Loading...