25
4. Scroll through the stored ID’s within the group before deletion, use the and keys.
If the Group ID does not exist in the database, this warning message is displayed:
<ID not found>
If the ID is used by a pager and not a group, the following message is displayed:
ID used by pager
5. If this is the entry you wish to delete, press the key. A new screen is shown prompting to confirm
deletion of this ID as shown below:
ID[1 ] DELETE
(Send confirms)
6. If you wish to delete this Group ID, press the key again and the screen displays Group Deleted
before returning you to the Group Menu. If you do not wish to delete that Group ID from the database,
press a numeric key on the keypad, and you are returned to the Group Menu without deleting it.
7. To return to Normal Mode, press the key three times to exit out of all menus. MAXPage then restarts
and is ready for use.
Time
This menu options is used to set the current time. The time is used for certain functions in MAXPage, including the
reminders functionality, described in the next section.
1. At the User Mode menu screen, press to select Time. Once you are in the Time Menu, you see the
current set time.
2. To exit this menu without saving changes, press the key. If you wish to alter the set time, using the
keypad, type the first two digits (hours) of the time in 24 hour format.
3. Use the key to move along to the minutes field.
4. Type in the next two digits (minutes) using the keypad.
5. When all fields have been correctly filled, press to save settings and go to the User Mode menu
screen.
6. To return to Normal Mode, press the key once to exit out of all menus. MAXPage then restarts and is
ready for use.
NOTE: The time must be entered in 24 hour format.
Reminders
This menu option is used to set reminders. Reminders are used to send predetermined messages to a pager or group
at a set time of the day. This is useful for reminding staff of daily tasks etc.
To Next Page
Loading...