Steketee EC-WEEDER - Cleaning and Care; After Working in the Field; Cleaning with High-Pressure Cleaner

7 Cleaning and care
7.1 After working in the eld
► Remove soil from the implement.
ð
No soiling of roads: Soil remains in the eld.
7.2 Cleaning with high-pressure cleaner
The user can clean the machine with the high-pressure cleaner.
When cleaning, the user must observe the following:
ATTENTION
Damage due to cleaning with a high-pressure cleaner
Components may be damaged when cleaning with a
high-pressure cleaner.
When cleaning with a high-pressure cleaner:
– Observe the position and meaning of the labels.
– Make sure that no water enters the electrical, elec‐
tronic and hydraulic components.
– Do NOT point the jet of the high-pressure cleaner
directly at the bearings or seals.
Cleaning and care
en-GB | Item no. 17513597 | BA 02/05-2022 95