EasyManua.ls Logo

Steketee EC-WEEDER - Driving the Tractor-Machine Combination; Safety Devices and Labels

Default Icon
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.6.2 Driving the tractor-machine combination
Mounted or trailed machines change the driving characteristics of the
tractor.
The driving characteristics also depend on the operating status, the
lling or loading and on the subsoil.
If the driver does not consider changed characteristics, accidents may
occur.
Observe changed driving behaviour when driving.
Ä
Chapter 5 ‘Road travel’ on page 52
The tractor-machine combination may overturn:
n When folding in and out
n When driving on slopes
n When travelling around tight bends
This may result in accidents with injuries or death of persons or damage
to the machine.
When folding in and out, make sure that the machine is standing
on a at surface.
Observe driving behaviour when driving on a slope.
Before travelling around tight bends: Reduce forward speed appro‐
priately.
2.7 Safety devices and labels
For the protection of the user, other persons and the machine, the
machine is equipped with special safety devices, e.g.:
n Lighting equipment and markings
n Stabilisation
The actual equipment of the machine with safety devices depends on
the country-specic rules and regulations.
Ä
Chapter 3.2.2 ‘Safety devices’ on page 24
Dierent driving behaviour
Risk of tipping
Safety
en-GB | Item no. 17513597 | BA 02/05-2022 14

Table of Contents