Steketee EC-WEEDER - Adjusting the Machine; Required Adjustments Prior to Operation

6.3 Adjusting the machine
6.3.1 Required adjustments prior to operation
Unless otherwise specied, the user can carry out the adjustments
described below both at the farm and in the eld.
ATTENTION
Risk of destroying crops
The user must check adjustments and measurements
made at the farm before working in the eld and correct
them, if required.
Preconditions:
√ The implement is mounted correctly at the tractor.
√ Folding implements are folded out fully.
√ The tractor implement combination is located on a level, horizontal
surface.
Align the implement (adjust the height of the
toolbar and the support wheels, align the paralle‐
logram).
Ä Page 72
Adjust the distances of the hoeing elements.
Ä Page 73
Select and adjust the tools.
Ä Page 76
Adjust the working depth of the hoeing elements.
Ä Page 85
Adjustments at a glance
Operation
en-GB | Item no. 17513597 | BA 02/05-2022 66