4 Attaching
4.1 Checking suitability of the tractor
WARNING
Risk of accident due to unsuitable tractor
If the tractor is not suitable for the machine, compo‐
nents of the machine may be overloaded and the tractor-
machine combination may not be steered safely.
This may result in accidents with injuries or death of
persons or damage to the machine.
– Prior to attachment, it must be ensured that the
tractor is suitable for use with machine.
Checklist
Tractor power
The tractor power must be within the permitted power range.
Ä Performance data, page 114
Three-point linkages
The categories of the tractor’s three-point linkage as well as the
lower link recesses and the top link recesses of the machine must
match.
If the categories dier, the user must adjust the tractor’s three-
point linkage or replace the machine’s lower link recesses and top
link recesses with a suitable, approved version.
Ä Connecting equipment at the implement,
page 117
Ä Cross shaft overview, page 130
Electrical connections
An electrical connection must be available on the tractor for each
consumer.
Ä Electrical connections, page 115
Hydraulic connections and hydraulic power
A hydraulic connection and a suitable control unit must be avail‐
able for each consumer.
The hydraulic power of the tractor must meet the requirements of
the machine.
Ä Hydraulic connections, page 115
Hydraulic oil
The hydraulic oils of the machine and tractor must be compatible.
Ä Operating materials, page 116
Attaching
en-GB | Item no. 17513597 | BA 02/05-2022 42
To Next Page
Loading...