2.5 Technically perfect condition
Operational safety of the machine cannot be guaranteed without
proper preparations in accordance with these operating instructions.
This may result in fatal or serious injuries.
► Use the machine only after proper preparations.
Ä
Chapter 4.3 ‘Preparations on the tractor’ on page 43
If the technical limit values of the machine are not observed, the
machine will be damaged.
This may result in fatal or serious injuries.
► Observe the machine-specic limit values.
Ä
Chapter 12 ‘Technical data’ on page 113
Damage to the machine can impair the operational safety of the
machine and cause accidents.
This may result in fatal or serious injuries.
To ensure that the machine is in a safe condition, carry out the fol‐
lowing measures:
► Check the machine according to the maintenance schedule.
Ä
Chapter 9.2.1 ‘Maintenance schedule’ on page 98
► Repair damage and eliminate causes of damage immediately.
► Remove coarse dirt.
If safety-relevant damage cannot be repaired in accordance with these
operating instructions:
► Have damage repaired by a qualied specialist workshop.
Operation only after proper prepara‐
tions
Observe the technical limit values
Danger due to damage to the
machine
Safety
en-GB | Item no. 17513597 | BA 02/05-2022 12
To Next Page
Loading...