Steketee EC-WEEDER - Basic Operation; Lowering and Raising the Stands

6.2 Basic operation
6.2.1 Lowering and raising the stands
Depending on the equipment, the implement can be equipped with
two or more stands.
During operation, the stands are xed in the upper position.
Precondition:
√ The tractor implement combination is secured against rolling away.
To lower the stands:
1. Raise the implement approx. 1...5 cm using the three-point linkage.
2.
Dismantle the pin
3
.
3. Let the stands slide onto the ground.
4.
Secure the stands in the lower position
4
using pins and screws.
To raise the stand:
1.
Dismantle the pin
3
.
2. Raise the stands.
3.
Secure the stands in the upper position using pins
3
and screws
2
.
1
23
1
Stand
2
Screw
3
Pin
4
4
Lowered
Operation
en-GB | Item no. 17513597 | BA 02/05-2022 56