Steketee EC-WEEDER - During the Maintenance and Repair; Maintenance and Repair Work; Preparations; Maintaining the Machine Properly

9 Maintenance and repair work
9.1 Maintaining the machine properly
Certain activities, e.g. working on hydraulic hoses, should only be car‐
ried out by service personnel.
These activities are marked with the symbol and in the maintenance
schedule in the SERVICE PERSONNEL column.
9.1.1 Preparations
1. Park the machine.
2. Secure the machine to prevent it from rolling away.
3. When working on folding machines:
Fold out the folding parts of the machines or secure them against
folding out.
4. When working on raised machines:
Secure the machines against lowering (e.g. with support elements).
5. Remove the ignition key.
6. Notify other people of the maintenance work.
Necessary deviations from this procedure are described in the respec‐
tive maintenance chapters.
9.1.2 During the maintenance and repair
To prevent accidents or injuries:
► Wear protective equipment.
► Use auxiliary equipment, e.g.:
n Suitable tools
n Climbing aids
n Supporting elements
► For dismantling and mounting heavy components:
Use hoisting gear.
► Check nuts and screw heads etc. for wear and tear. Consult a spe‐
cialist if necessary.
► Follow maintenance instructions.
Personnel
Maintenance and repair work
en-GB | Item no. 17513597 | BA 02/05-2022 97