Steketee EC-WEEDER - Safe Handling; Personal Protective Equipment

Structural modications and extensions can impair the functionality
and operational safety of the machine.
This may result in fatal or serious injuries.
Auxiliary equipment and spare parts that do NOT comply with the man‐
ufacturer's requirements may negatively aect the operational safety of
the machine and cause accidents.
► Modications and conversions may only be carried out with the
written consent of the manufacturer.
► Structural modications and extensions must only be carried out
by an authorised specialist workshop.
► Use original spare parts or parts approved by the manufacturer.
► Only use the auxiliary and operating materials listed.
Ä Chapter 12.6 ‘Operating materials’ on page 116
Improper welding work endangers the operational safety of the
machine.
This may result in fatal or serious injuries.
► Have welding work carried out by a qualied specialist workshop.
2.6 Safe handling
2.6.1 Personal protective equipment
Carrying and wearing protective equipment is an important safety
component.
Lack of or inappropriate protective equipment increases the risk of
damage to health and injury to persons.
For certain work on the machine, the following protective equipment is
required in addition to suitable workwear:
n Safety gloves
Use protective equipment as follows:
► Only use protective equipment that is in proper condition.
► Only use protective equipment that provides eective protection.
► Adapt protective equipment to the respective person, e.g. size.
Modications at the machine
Welding work
Safety
en-GB | Item no. 17513597 | BA 02/05-2022 13