Steketee EC-WEEDER - Maintenance and Repair Work 9.3 Lubricating 9.3.1 Lubrication Schedule; Lubricating; Lubrication Schedule

9.3 Lubricating
9.3.1 Lubrication schedule
INFORMATION
The lubrication points are colour coded on the machine.
Chap. Task to execute
Before the season
After cleaning
Every 10 operating hours
Every 20 operating hours
Every 50 operating hours
Every 100 operating hours
Page
9.3.2 Lubricate folding toolbar ● ● 105
9.3.2 Lubricate nger weeder ● ● ● 105
9.3.2 Lubricate axle bearing of rotor weeder ● ● ● 105
9.3.2 Lubricate arm of rotor weeder ● ● ● 106
9.3.2 Lubricate track disc ● ● 106
9.3.2 Lubricate parallelogram of Basic-Element and TRS-Element ● ● ● 106
9.3.2 Lubricate long guard plate ● ● ● 107
9.3.3 Grease top link pin ● ● ● 107
9.3.3 Grease pin ● ● 107
9.3.3 Grease piston rods ● ● 108
9.3.3 Grease surfaces ● ● 108
Maintenance and repair work
en-GB | Item no. 17513597 | BA 02/05-2022 104