WARNING
Risk of accident due to incorrect air pressure
Excessive air pressure in the tyres may cause them to
burst. Insucient air pressure can lead to overloading
of the tyres. This will have a negative inuence on accu‐
rate follow-on of the machine. This may result in acci‐
dents with injuries or death of persons or damage to the
machine.
– Do NOT use the assembly air pressure stated on the
tyres.
– Set air pressure according to the details in the tech‐
nical data.
► Check air pressure. Correct according to the details in the technical
data.
Ä
Chapter 12.7 ‘Tyres and wheels’ on page 116
► Tighten the wheel nuts on the machine to the respective tight‐
ening torque.
9.2.3.2 Bolted connections
The bolted connections on the hoeing elements, tool holders and tools
must always be tight.
1. Observe bolted connections.
2. If required, retighten screws.
Checking air pressure
Checking wheel nuts
Checking bolted connections of the
hoeing elements
Maintenance and repair work
en-GB | Item no. 17513597 | BA 02/05-2022 100
To Next Page
Loading...