WARNING
Risk of accident due to incorrect ballasting
The hoeing implement can be lighter or heavier than
when delivered, depending on the equipment with
hoeing elements and tools.
– To determine the actual weight and for correct bal‐
lasting: Weigh the implement.
12.3 Performance data
Data Value Unit
Permitted tractor power, minimum 40 HP
Permitted tractor power, minimum 30 kW
Permitted tractor power, maximum 280 HP
Permitted tractor power, maximum 206 kW
Operating speed, minimum...maximum 2...15 km/h
Operating speed with Section Control,
minimum...maximum
3...6 km/h
Transport speed, max. 40 km/h
Data Value Unit
Required pressure in the hydraulic
system of the tractor
60 bar
Required hydraulic power (oil output) 5...10 l/min
Max. permitted operating pressure 200 bar
ATTENTION
The pressure relief valves are factory set and may not be
adjusted.
Tractor power requirements
Hydraulic power requirements of the
tractor
Technical data
en-GB | Item no. 17513597 | BA 02/05-2022 114
To Next Page
Loading...