B Calculation of axle load and ballasting for mounted machines
The calculation of the axle loads and required ballasting is based on
data from the operating instructions for the tractor and machine. The
result of the calculation is a guide value for an initial assessment of
the axle loads and the required ballasting. For exact results weigh the
tractor "empty" and "with mounted machine" (tractor, front axle, back
axle).
B.1 Data
To calculate axle loads, the following data items are required for each
tractor that is used:
n Data from operating instructions for the tractor
n Data from operating instructions for the machine
n Data from measurements on the tractor
n Data from measurements on the tractor/machine combination
Calculation of axle load and ballasting for mounted machines
en-GB | Item no. 17513597 | BA 02/05-2022 126
To Next Page
Loading...