EN-38
Dimensions Camera Console:
12.5″ w × 4.0″ h × 15.25″ d
(31.8 cm w × 10.2 cm h × 38.7 cm d)
Camera Head Cable:
10.3 ft (3.15 m) sealed cable
20.7 ft (6.30 m) cable extension available
Classication Class I Equipment
Continuous Operation
Type BF Applied Part
Ingress Protection, IPX0—Ordinary Equipment
(1488 HD Consoles)
Ingress Protection, IPX7—Protected against
the eects of temporary immersion in water
(1488 HD Camera Heads)
Complies with Laser
Product Standards
Class 1 Laser Product
Contains four 850-nm laser diodes
This product complies with IEC
60825-1:1993+A1:1997+A2:2001.
This product complies with 21 CFR,
Subchapter J, Parts 1040.10 and 1040.11,
except for deviations pursuant to Laser Notice
No. 50, dated July 26, 2001.
To Next Page
Loading...
