To Next Page

To Previous Page

EN-53

Note: A keyboard will appear for manually entering values in these elds if one of the

choices from the dropdown menu is not selected� User names and addresses can be added

or deleted as appropriate�

3� Press the ANONYMOUS, SECURE, or PASSWORD button to select the desired type of FTP

4� Press the PING button to test connection to the FTP site�

SDC3 Networking Setup

Setup Requirements

• Protocol Used: FTP (File Transfer Protocol)

• A TCP/IP network�

• A secure FTP (FTP over SSH) server may be installed and congured, if needed� SDC3 does

not support FTP over SSL�

Instructions

1� Enter the IP address of the FTP server (and not the SDC3) into the SDC3 tab in the “Cong”

menu�

2� Create a folder named SDC3 in the default path of the FTP Server� In this folder, create a

folder for the User name� For example, if you have anonymous FTP service running on a

server with an IP address of 10�2�101�26, and you have a folder called JOHND in the SDC3

folder in the default path of the anonymous login, then you should enter 10�2�101�26 in the

NETWORK tab as the ‘FTP Address’ and JOHND as the ‘Username�’

3� Press the ADD button so that SDC3 will remember the user name and the FTP Address in the

list� SDC3 can remember up to 500 user names and FTP addresses�

4� Select the Write Videos checkbox on the NETWORK tab to write videos to the network�

5� Press the SAVE TO NETWORK button from the Save menu to save images and videos� A

conrmation screen will display� Check the Anonymous Login checkbox�

The SDC3 checks the server for a response� If it gets a valid response, it performs an anonymous

FTP login� It then changes directory to the directory corresponding to the current Username

(JOHND, in current example)� It does not create a new directory based on the Username� This

avoids creation of multiple directories if someone accidentally enters a wrong/invalid Username�

Therefore, you have to enter a Username for the FTP to work�

For Login with Username and Password

Note: The FTP server should be setup for the users who have access� Passwords should be all caps�

1� Create a folder under the root folder of the FTP server folder�

2� Create another folder under the SDC folder with the same name as the user name�

Follow steps 3 - 5 above, except in step 5, uncheck the Anonymous Login checkbox and enter the

password�

Directory Structure

• <Default FTP path>\SDC\Username\?????MMDDYYYY_HHMMSS where, ?????: First 13

characters of the Patient’s Name / ID entered

Stryker SDC3 User Guide

Other manuals for Stryker SDC3