Sun Microsystems 2500 - Iscsi Configuration Example Using Solaris; To Prepare for the Iscsi Configuration

107
APPENDIX
B
iSCSI Configuration Example
Using Solaris
This appendix shows an example of iSCSI configuration on a Solaris data host in the
following sections:
“To Prepare for the iSCSI Configuration” on page 107
“To Configure iSCSI” on page 108
▼ To Prepare for the iSCSI Configuration
1. Log into the data host as super user.
2. Identify the minimum required OS, software packages, and patches by referring
to the Sun StorageTek 2500 Series Array Release Notes, 6.1 or higher.
Download from http://docs.sun.com/app/docs/coll/st2500arrays
You can also apply the latest patches from:
http://sunsolve.sun.com/show.do?target=patchpage
a. Verify that you are running the required Solaris OS:
# cat /etc/release
b. Verify that iSCSI software packages are installed
# pkginfo SUNWiscsiu SUNWiscsir
system SUNWiscsiu Sun iSCSI Device Driver (root)
system SUNWiscsir Sun iSCSI Management Utilities (usr)
c. Verify that you have the latest patches applied for the iSCSI packages. For
example:
On a SPARC system: