62 Sun StorageTek 2500 Series Array Hardware Installation Guide • September 2009
Caution – Potential data loss – Moving a storage array or array components that are
configured as part of a volume group can result in data loss. To prevent data loss,
always consult a Customer Support representative before relocating configured
drives, controller trays, or drive expansion trays.
Do not move controller trays or drive expansion trays that are part of a volume
group configuration. If you must move array components, contact a Customer
Support representative for procedures. A Customer Support representative might
direct you to complete several tasks prior to undertaking the relocation. These tasks
might include:
■ Creating, saving, and printing an array profile of each storage array that is
affected by the relocation of a drive or tray.
■ Performing a complete backup of all data on the drives that you intend to move.
■ Verifying that the volume group and each of its associated volumes on the
affected storage array have an Optimal status.
■ Determining the location and status of any global hot spares associated with the
affected storage array.
Next Steps
After You Connect The Management And Data Hosts, You Can Power On The Trays,
As Described In Chapter 7.
To Next Page
Loading...
Need help?
General
