63
CHAPTER
5
Connecting Data Hosts to the 2530
Array
This chapter describes Sun StorageTek 2500 Series Array cable connections for hosts.
It contains the following sections:
■ “Connecting Data Hosts to the 2530 Array” on page 63
■ “Next Steps” on page 67
Connecting Data Hosts to the 2530 Array
Data transmission between the host and the controllers in the array module is
through Serial Attached SCSI (SAS) cables.
All connections from the host to the
controllers are direct connections. FIGURE 5-1 shows an example of a direct host
connection from a single data host with dual HBAs.
To Next Page
Loading...
