Chapter 5 Connecting Data Hosts to the 2530 Array 67
Do not move controller trays or drive expansion trays that are part of a volume
group configuration. If you must move array components, contact a Customer
Support representative for procedures. A Customer Support representative might
direct you to complete several tasks prior to undertaking the relocation. These tasks
might include:
■ Creating, saving, and printing an array profile of each storage array that is
affected by the relocation of a drive or tray.
■ Performing a complete backup of all data on the drives that you intend to move.
■ Verifying that the volume group and each of its associated volumes on the
affected storage array have an Optimal status.
■ Determining the location and status of any global hot spares associated with the
affected storage array.
Next Steps
After You Connected The Management And Data Hosts, You Can Power On The
Trays, As Described In Chapter 7.
To Next Page
Loading...
Need help?
General
