114 Sun StorageTek 2500 Series Array Hardware Installation Guide • September 2009
2. Configure the iSCSI initiator tool to be able to map the volume created on the
storage array.
a. Launch the iSCSI initiator tool from the control panel.
By default, the installation places the shortcut to the iSCSI initiator applet on
the desktop.
b. Note the IQN (iSCSI Qualified Name) of the iSCSI initiator.
3. In the CAM software, create the initiator with the IQN of the data host.
Refer to “Adding Initiator Information” on page 103 for details.
To Next Page
Loading...
