Sun Microsystems 2500 User Manual

136 Sun StorageTek 2500 Series Array Hardware Installation Guide • September 2009
6. Verify your configuration information and click Finish.
The DHCP Manager displays the following:
7. In the Address Properties window, do the following:
a. In each Client ID field, enter 01 followed by the MAC address that is printed
on the back of the controller. For example:
0100A0E80F924C
b. Toward the bottom of the window, select “Assign only to BOOTP clients.”

Sun Microsystems 2500 Specifications

General

Brand	Sun Microsystems
Model	2500
Category	Speaker System
Language	English