32 Sun StorageTek 2500 Series Array Hardware Installation Guide • September 2009
FIGURE 2-2 Positioning the Front of the Left Rail Behind the Left Front Cabinet Rail
2. Insert the 8-32 screws through the center holes in each RU of the rack into the
top and bottom holes in the Universal rail ().
These screws pass through the cabinet rail holes and screw into threaded holes in
the Universal rail.
FIGURE 2-3
3. Repeat Step 1 and Step 2 for the right rail.
4. At the back of the cabinet, adjust the length of the left rail as needed to fit the
cabinet, and position the rail flange behind the face of the cabinet rail
(
FIGURE 2-4).
To Next Page
Loading...
