SUNWARD SWDE200B - Seat Adjustment Mechanics

SWDE200B Operation & Maintenance Manual
32
Panel F
No.
Part
Button
Code
Indicator
Light Status
Remark
1
Fast Travel
Speed
F1
Green
2
Oil
Cooling
F2
Green
3
Warning
Light
F3
Green
4
Pulse
Power
F4
Green
5
Water
Heating
F5
Yellow
6
Oil
Heating
F6
Yellow
7
Dedusting
Water
Pump
F7
Green
Optional
8
Standby
F8
Green
Input and
Output
Control
of Bus
Panel
Function
Switch
Corresponding Output
Swing Rod
Limit Retract
Press down the switch, the indicator light is on and the
swing rod limit block retracts.
Swing Rod
Limit Extend
Press down the switch, the indicator light is on and the
swing rod limit block extends.
Left Front
Outrigger
The valve opens, and the indicator light is on, the valve
closes and the light is off.
Right Front
Outrigger
The valve opens, and the indicator light is on, the valve
closes and the light is off.
Left Rear
Outrigger
The valve opens, and the indicator light is on, the valve
closes and the light is off.
Right Rear
Outrigger
The valve opens, and the indicator light is on, the valve
closes and the light is off.
Diesel/Electrical
Conversion
Press down the switch for 3 seconds, the indicator light is
always on, this is the diesel engine mode; The indicator
light is off, this is the electric mode.
Transformer
Cooling
The light is on and the transformer cooling is enabled.
Hydraulic Oil
Cooling Switch
When hydraulic oil is more than 60°C, “Hydraulic oil
heat up too fast, the cooling fan start automatically” is
shown on the meter. And the valve open automatically,
the indicator light is always on. If hydraulic oil is lower
than 50°C, valve is off and the indicator light is off; At
this time, turn on and off the switch for 2 seconds, the