Sym RV 250i User Manual

5. Removal & Installation of Engine
5-4
Remove AC. generator and crankshaft position sensor
coupler.
Remove start motor wire from the start relay.
Remove O2 sensor wire coupler.
Remove fuel pump relay wire coupler.
Start engine for the pipeline to be exhausted within the
residual pressure, the engine flameout, relaxing fuel
tube folder, open for fuel tube.
Caution
● Demolition for the pipeline, will be required for
residual pressure in the pipeline to divest, or use
the folder surrounds the tubing to prevent petrol
splash.
Start motor wire
O2 sensor coupler
Fuel tube
To this chapter contents
A
C. generator and crankshaft
position sensor coupler
O2 sensor coupler
Fuel pump relay coupler

Sym RV 250i Specifications

General

Brand	Sym
Model	RV 250i
Category	Scooter
Language	English